User guide

Figure 14.1: Serial SSH Passthrough
Enabling SSH Passthrough
To enable or disable SSH Passthrough:
1. Click the System tab.
2. Click DSView Server in the top navigation bar.
3. Click SSH Passthrough in the side navigation bar. The SSH Passthrough Properties
window opens.
4. To enable SSH Passthrough, select the Enable SSH Passthrough checkbox.
-or-
To disable SSH Passthrough, uncheck the Enable SSH Passthrough checkbox.
5. In the event of a network failure, you may establish an SSH Passthrough session to the
target device through Modem Dial-Up. To allow this capability, select the Enable Modem
Dial-Up Connections checkbox. If the main network connection is unavailable when
trying to open an SSH Passthrough session, you will be notified that the network is
unreachable and a connection over modem dial-up is being established.
-or-
222 DSView™ 4 Installer/User Guide