User guide

Example: Target device connections
In the following example, there are three target devices connected to ports 3, 4 and 8 of a DSR
1021 switch named dsr-1021-huntsville. The DSR 1021 switch ports are connected to the three
target devices using IQ modules. The IQ module with an EID of 520255-044F6F is connected
to target device td-john, while 520255-03F757 is connected to td-mary and 520255-016BE0 is
connected to td-tim.
dsr-1021-huntsville(3)→520255-044F6F→td-john
dsr-1021-huntsville(4)→520255-03F757→td-mary
dsr-1021-huntsville(8)→520255-016BE0→td-tim
Example: Cascade switch connection
In the following example, an AutoView 200 1 x 8 switch is connected to port one of a DSR
1021 switch named dsr-1021-huntsville, using an IQ module with an EID of 520255-023FB7.
Each port of the AutoView 200 switch is connected to a different target device (520255-
023FB701 through 520255-023FB708).
dsr-1021-huntsville(1)→520255-023FB7→switch one (1)→520255-023FB701
dsr-1021-huntsville(1)→520255-023FB7→switch one (2)→520255-023FB702
dsr-1021-huntsville(1)→520255-023FB7→switch one (3)→520255-023FB703
dsr-1021-huntsville(1)→520255-023FB7→switch one (4)→520255-023FB704
dsr-1021-huntsville(1)→520255-023FB7→switch one (5)→520255-023FB705
dsr-1021-huntsville(1)→520255-023FB7→switch one (6)→520255-023FB706
dsr-1021-huntsville(1)→520255-023FB7→switch one (7)→520255-023FB707
dsr-1021-huntsville(1)→520255-023FB7→switch one (8)→520255-023FB708
Example: Power device connection
In the following example, an Avocent SPC power device is connected to the SPC port of a
DSR 1021 switch named dsr-1021-huntsville. SPC device outlet A1 is connected to target
device 02-17-F2 SPC A1.
dsr-1021-huntsville(SPC)→02-17-F2 SPC (A1)→02-17-F2 SPC A1
To display a connections window:
1. In a Units View window (see Accessing Units View windows on page 118) click on a unit
name. The Unit Overview window will open.
2. Click Connections in the side navigation bar.
Chapter 12: Unit Sessions and Connections 205