User guide

7. Click Close. The Power Devices Attached to Appliance window will open.
8. Click Close. The Units View window will open.
Power Device Sockets
To display information about power device sockets or initiate a push/pull operation:
1. In a Units View window containing appliances (see Accessing Units View windows on
page 118), click on the appliance name.
2. Click Appliance Settings, click Ports and then Power devices in the side navigation bar.
The Power Devices Attached to Appliance window will open.
3. Click on the name of a power device.
4. Click Sockets in the side navigation bar. The Power Device Sockets window will open.
If you change the IP address of a managed appliance that is attached to a power
device, the appliance may need rebooting. In this case, a Reboot Required icon will be
displayed in the top left corner of the Power Device Sockets window. Click the icon to
reboot the managed appliance.
5. To initiate a pull or push name operation (see Name Synchronization on page 141):
a. Click the checkboxes to the left of one or more device name(s). To select all names on
the page, click the box to the left of Appliance Name at the top of the list.
b. For a pull operation, click Pull Name.
c. For a push operation, click Push Name.
Customizing the Power Device Sockets window
The display fields and content of the Power Device Sockets window will differ according to
the power device type and models. For details, see the product documentation. Use the
Customize link to add or remove fields in the display. See Using the Customize link in windows
on page 30.
The following fields are always displayed, regardless of the power device type and model.
• Socket - Socket (outlet) number.
• Appliance Name - Name of the power device socket in the appliance.
• Unit Name - Name of the power device socket in the DSView software database.
Chapter 11: Power Devices and Power Device Sockets 189