User guide
NOTE: Depending on the appliance, the add local users steps will vary slightly. Please consult the appliance and
plug-in documentation.
To delete a local user account:
1. In a Units View window containing appliances (see Accessing Units View windows on
page 118), click on the appliance name.
2. Click Appliance Settings in the side navigation bar and then click Local Accounts. The
Appliance Local User Accounts window will open.
3. Click the checkbox to the left of the local usernames to be deleted. To delete all local user
accounts, click the checkbox to the left of Name at the top of the list.
4. Click Delete. A confirmation dialog box will appear.
5. Confirm or cancel the deletion.
To change the settings of a local user account:
1. In a Units View window containing appliances (see Accessing Units View windows on
page 118), click on the appliance name.
2. Click Appliance Settings in the side navigation bar and then click Local Accounts. The
Appliance Local User Accounts window will open.
3. Click on the name of a local user account. The Appliance Local User Account Settings
window will open.
4. Type a new name for the local user.
5. Select a preemption level (1-4) for the local user. See Preemption Levels on page 45.
6. If available, select an access level: User Administrator, Appliance Administrator or User.
7. Type a new password for the local account and then confirm the password.
8. Click Save and then click Close. The Appliances window will open.
Embedded Units
The IBM ASM RSA II and the DRAC 4 embedded units have one target port and one
appliance for each embedded appliance.
The NEC IPF embedded unit has nine target ports and one appliance for each embedded
appliance. Port names default to “Blade” plus the port number.
The HP iLO embedded unit has one target device.
Chapter 10: Managing Units 179