User guide

the Customize link in windows on page 30.
To add a local user account:
1. In a Units View window containing appliances (see Accessing Units View windows on
page 118), click on the appliance name.
2. Click Appliance Settings in the side navigation bar, click Local Accounts and then Users.
The Appliance Local User Accounts window will open.
3. Click Add. The Add Local User Account Wizard will appear.
4. The Type in Local User Credentials window will open.
a. Type the name of the local user account.
b. Type a password for the local user account.
c. Confirm the password for the local user account.
d. Click Next.
5. The Select Preemption Level window will open. Select a preemption level (1-4) for the
local user. This will be used for KVM, serial and virtual media sessions. (See Preemption
Levels on page 45.) Click Next.
6. The Select Access Level window will open. Select an access level from the menu:
Appliance administrator, User or User administrator. (DSR 1010, DSR 2010 and DSR 4010
switches support local accounts, but the Appliance administrator access level cannot be
changed, so this menu will not appear for these switches.)
7. Click Next.
If you selected User, go to step 8.
If you selected Appliance Administrator or User Administrator, go to step 9.
8. The Assign target devices window will open. Add or remove user access rights to a target
device:
a. To add user access rights to one or more target devices, select the target device(s) in
the Available Target Devices list, then click Add. The target devices will be moved to
the Assigned Target Devices list.
b. To delete user access rights to one or more target devices, select the target device(s) in
the Assigned Target Devices list, then click Remove. The target devices will be moved
to the Available Target Devices list.
9. Click Next. The Completed Successful window will open.
10. Click Finish. The Appliance Local User Accounts window will open.
178 DSView™ 4 Installer/User Guide