User guide

To save an appliance configuration template:
NOTE: This procedure creates an appliance configuration template than can be applied to any unit of the same
family as the model unit.
1. In a Units View window containing appliances (see Accessing Units View windows on
page 118), select the appliance you want to use as the model for the appliance
configuration template. The Unit Overview window opens.
2. Click the Save Configuration Template icon or link. The Save Appliance Configuration
Template Wizard opens.
3. Enter a name for the appliance configuration template. Click Next.
4. The Completed Successful window opens. Click Finish.
To save the last known good or current configuration template:
NOTE: This procedure creates appliance configuration templates that can only be applied to the selected unit.
In a Units View window containing appliances (see Accessing Units View windows on page
118), select the appliance for which you want to save an appliance configuration template.
Click the Save Last Known Good Configuration Template or Save Current Configuration
Template icon or link.
-or-
In a Units View window containing appliances, select the checkbox next to the appliance for
which you want to apply the appliance configuration template. From the Operations menu,
select Save Last Known Good Configuration Template or Save Current Configuration
Template.
Modifying appliance configuration template properties
To view, modify or delete appliance configuration template files:
NOTE: Administrator rights are required to view and delete appliance configuration template files.
1. Click the System tab.
2. Click Appliance Files in the top navigation bar.
3. Click Configuration Template in the side navigation bar. A list of configuration templates
is displayed.
4. To delete an appliance configuration template, select the checkbox next to the template(s)
and click Delete.
156 DSView™ 4 Installer/User Guide