User guide

4. The DSView software will search for managed appliances within the IP address range.

When the search is completed, the Select Appliances to Add window will open, listing the

results.

5. Add or remove appliances.

• To add one or more managed appliances, select the managed appliances in the

Appliances found list, then click Add. The managed appliances will be moved to the

Appliances to Add list.

• To remove one or more managed appliances, select the managed appliances in the

Appliances to Add list, then click Remove. The managed appliances will be moved to

the Appliances found list.

Click Next.

6. The Select Options window will open. (For more information about the options that affect

adding target devices connected to the appliance, see Topology Synchronization on page

146.)

For appliances that are supported by plug-ins, the content of this window may differ;

see the appropriate documentation.

a. Click Enable secure mode if you want the managed appliance to only be accessible by

this DSView software system. In non-secure mode, the managed appliance may be

added to multiple DSView software systems.

NOTE: For appliances that require Secure mode, this checkbox will not be visible and the appliance will enable

Secure mode automatically.

b. Click Allow target devices with the same name to be merged into a single target

device if you wish to merge a target device that has multiple connections into a single

target device.

c. Under Allow target devices that contain default names to be added for these type of

connections, you may enable one or more connection types. Any target devices that

contain default names in the managed appliance and support the enabled connection

type in the managed appliance will be added to the DSView software database.

This option has no effect when adding a DSI5100 appliance, since default

target device names are not supported. A target device is named when it is

added as a BMC port using the Add IPMI BMC Wizard.

d. Select the certificate key-size.

e. Click Next.

136 DSView™ 4 Installer/User Guide