User guide

If you want to apply a configuration template to the appliance, select a template from
the list and click Next.
-or-
If you do not want to apply a configuration template to the appliance, select None and
click Next.
NOTE: For more information about configuration templates, see Appliance Configuration Templates on page 155.
8. Click Finish.
Adding a single embedded appliance
This procedure is valid only for IBM ASM RSA II, DRAC 4, HP iLO and NEC IPF embedded
appliances.
To add a single embedded appliance:
1. In a Units View window containing managed appliances (see Accessing Units View
windows on page 118), click Add. The Add Appliance Wizard will open.
2. The Select Add Unit Procedure window will open. Click Add a single appliance.
3. If you were not in an appliance type Units View window when you clicked Add in the
first step, the Select Appliance Type window will open. Select an embedded appliance
from the product list, then click Next.
• For an IBM ASM RSA II embedded appliance, go to step 4.
• For a DRAC 4 embedded appliance, go to step 5.
• For an HP iLO embedded appliance, go to step 6.
• For an NEC IPF embedded appliance, go to step 7.
4. For IBM ASM RSA II embedded appliances:
a. The Configure IBM ASM RSA II Settings window will open.
b. In the Appliance Name field, type a 1-64 character appliance name. The name is not
case sensitive.
c. In the Address field, type a 1-256 character IP address in dot notation form or a DNS
name. The address is not case sensitive.
d. In the Username field, type a 1-64 character username to be used to log in to the
embedded appliance. Usernames are case sensitive.
e. In the Password field, type a 1-64 character password to be used to log in to the
embedded appliance. Passwords are case sensitive.
Chapter 8: Adding and Deleting Units 133