User guide

a. To select one or more certificates, click the checkbox to the left of the server IP
addresses. To unregister all certificates, click the checkbox to the left of the IP Address
heading.
b. Click Unregister to unregister the certificates.
c. A confirmation message box will appear. Confirm or cancel the operation.
18. Click Close. The User Authentication Services window will open.
To change user browsing settings for the Active Directory external authentication
service:
1. Click the Users tab.
2. Click Authentication in the top navigation bar. The User Authentication Services window
will open.
3. Click the name of the AD service. The side navigation bar will change to include the name
of the AD service at the top and, below the name, the information you may define.
4. From the side navigation bar, click User Browsing. The Authentication Service User
Browsing - AD window will open.
5. Click Browse Anonymously to browse users on the external Active Directory authentication
server.
-or-
Click Browse with User Credentials to browse users on the external Active Directory
authentication based on credentials configured on the server. If this option is selected,
do the following:
a. Type the username for an Active Directory account that has browse rights in the User
Name field. The log in ID must be entered in case sensitive text if the Active Directory
server is set up to use Kerberos.
b. Type the password for an Active Directory account that has browse rights in the
Password field.
NOTE: The DSView server verifies that the new credentials are valid for the AD service. If the credentials are
invalid, an error message is displayed.
6. Click Save and then click Close. The User Authentication Services dialog box will appear.
Windows NT external authentication service
To add a Windows NT external authentication service:
1. Click the Users tab.
96 DSView™ 4 Installer/User Guide