User guide

Chapter 3: DSView Software Servers 79
By default, the replication task runs every 12 hours. You may change the schedule type, start
time, date and interval.
5. If you change the schedule, click Save and then Close.
You may also display the replication schedule from the hub server, but you cannot change it.
To initiate an immediate replication on a spoke server:
1. From the spoke server, click the System tab.
2. Click Tasks in the top navigation bar. The Tasks window will open.
3. Enable the checkbox to the left of the Database Replication task and then click Run Now.
To display the replication schedule for a spoke server from the hub server:
1. From the hub server, click the System tab.
2. Click Tasks in the top navigation bar.
3. Select the Database Replication task for the spoke server you wish to view. The Task Schedule
- Database Replication window will open.
Managing Licenses
License keys permit the operation of the DSView management software on the dedicated server
and specify the number of clients that may use the software and the number of spoke servers
allowed on a system.
To display license information:
1. Click the System tab.
2. Click Licenses in the top navigation bar.
3. Click Summary in the side navigation bar. The License Summary window will open. The
display includes:
• The serial number of the license key for the DSView software on the dedicated server.
• The number of licensed clients and the number of users currently logged in as clients. If a
site license has been purchased, the Unlimited heading will appear instead of the number
of licenses.
• The total number of licensed spoke servers and the number of these licenses currently in
use on the DSView software system.
To display license keys:
1. Click the System tab.
2. Click Licenses in the top navigation bar.
3. Click License Keys in the side navigation bar. The License Keys window will open and list
each installed license key and a description of the key. One of the following descriptions will
display beside each key: