Manualshelf

User guide

ManualsBrandsAvocent ManualsComputer equipmentEquinox Console Manager CCM4850 CCM4850 CCM4850
71727374757677787980
54 DSView Installer/User Guide
Server trap destinations
To specify trap destinations:
1. Click Trap Destinations in the side navigation bar. The DSView Server Trap Destinations
window will open.
2. In each address field, type the IP addresses in standard dot notation (xxx.xxx.xxx.xxx) or the
domain name for the computer that handles traps. Up to four computers may be specified.
3. Click Save to store the trap information in the DSView software database on the host.
Client session information
To specify client session information:
1. Click DSView Client Sessions in the side navigation bar. The DSView Server Client Session
Properties window will open.
a. Use the arrows to specify a time-out value (from 5-60 minutes) for inactivity of a DSView
user client session. The default is 15 minutes. When the time-out value has been exceeded,
the session will end and the user must log in again.
b. Select Enable certificate authentication to allow the DSView management software to
automatically log in internal users if the user certificate (X.509 digital ID) installed in the
DSView software client web browser matches the certificate configured for the user.
Certificates for users may be modified. See Changing certificates associated with users on
page 156 for more information.
Web browser settings may need to be modified to allow users to automatically log in using
certificates. See your web browser documentation for more information.
-or-
Select Enable Integrated Windows
®
Authentication to automatically log a user into the
DSView management software using the user’s NT domain or Active Directory
credentials and Integrated Windows Authentication.
Web browser settings may need to be modified to allow users to automatically log in using
Integrated Windows Authentication. See your web browser documentation for
more information.
c. Select Restrict by address range to enable only DSView software clients with IP
addresses entered in the Address List to communicate with DS1800 digital switches, CPS
appliances, CCM appliances and DSR switches.
-or-
Do not select Restrict by address range to disable address restrictions for logging into the
DSView management software.
2. Click Save to store client session information in the DSView software database on the host.