User guide

Chapter 1: Product Overview 21
%PORT% - The port number will be substituted.
%TNAME% - The target name of the unit will be substituted.
6. If the third party application does not automatically launch a command window, enable the
Launch in Command Window checkbox.
7. Click Save.
To disable use of a third party Telnet application:
1. Click the Profile tab. Preferences will automatically be selected in the top navigation bar.
2. Click Applications in the side navigation bar.
3. Uncheck the Enable 3rd Party Application checkbox.
4. Click Save.
The DSView Telnet Viewer will now be used when a serial session is launched.
Specifying a user certificate
NOTE: This property may only be modified for users using internal authentication. See Managing Authentication
Services on page 58 for more information.
A user may specify a certificate, if the administrator has allowed it.
As an alternative to this method, the administrator may specify the certificate in the user account
properties. See Changing certificates associated with users on page 156 for more information.
To enable user settable certificates:
NOTE: Only Administrators may access this procedure.
1. Click the System tab.
2. Click User Credential Properties in the side navigation bar.
3. Enable the Allow user to set own certificate checkbox.
4. Click Save.
To specify a user certificate:
NOTE: A user may access this procedure only if an Administrator has previously enabled it.
1. Click the Profile tab. Preferences will automatically be selected in the top navigation bar.
2. Click Credentials in the side navigation bar, then click Certificate.
3. Type the path and name of the certificate.
-or-
Use the Browse button and select a certificate using the Choose File dialog box.
4. Click Save. An updated Certificate window will open.