User guide

308 DSView Installer/User Guide
To refresh the Server view:
In the menu bar when the Servers view is displayed, select View - Refresh.
To connect to a server:
NOTE: Users with a User level account may connect to a server only when given access to a switch. See Built-in
User Groups on page 22 for more information.
From the Servers view, select a server and select Tools - Connect from the menu bar.
-or-
Select a server and click the Connect toolbar button.
-or-
Right-click on a server and select Connect from the shortcut menu.
A Video Viewer window will open. See Using the Video Viewer on page 171 for more information.
The following operations are unavailable when using the DSR Remote Operations command:
• Sharing (see Connecting to an existing KVM session on page 267 for more information)
• Stealth connections (see Connecting to an existing session on page 173 for more information)
• Scan Mode (enabled when two or more Video Viewer windows are open)
• Macro Creation (Macros - Configure from the Video Viewer window menu bar)
• View Connected Users (View - Connected Users from the Video Viewer window menu bar)
Managing SPC device sockets
Users with User level account privileges cannot change the power state of SPC device sockets. See
Built-in User Groups on page 22 for more information.
Use the Power view to manage SPC device sockets attached to the switch. See Power view on
page 304 for more information.
To display the Power view:
In the menu bar, click View - Power.
-or-
In the side navigation bar, click Power.
To refresh the Power view:
Select View - Refresh from the menu bar when the Power view is displayed.
To power up an SPC device socket:
1. Click Power in the side navigation bar. A list of SPC device sockets attached to the switch will
appear in the content area.
2. Select an SPC device socket that has not been powered up and select Tools - Power On from
the menu bar.