User guide

284 DSView Installer/User Guide
c. Click on a day in the calendar to close the calendar and fill the field to the left of the
calendar with the date you have selected.
4. Select an hour, minute and which half of the day for the start date.
5. In the first drop-down menu in the To line, select Events On to pick the end date and time for
event log entries you wish to view.
6. Repeat steps 3 and 4 to specify the end date period.
7. Click Apply. The previous event log view window will open with the event range specified in
the Filter Date window. The Clear Date Filter button will appear in the event log view window.
Clicking the button will display all events available for the event type and the button will no
longer be available in the window.
Displaying the Details of Event Log Entries
You may display all logged information about a specific event log entry.
To display the details of an entry in the event log:
1. In an Event Log window, click on the link in the Severity column for which you wish to dis-
play details. The Event Information window will open and contain information about the event
log entry.
NOTE: Trap Enterprise in the Event Log-All window is named Enterprise OID in the Event Information window.
2. Click Close. The Event Log window will open.
Deleting Event Log Entries
To delete an entry from the event log:
1. In an Event Log window, click the checkbox to the left of the event(s) you wish to delete.
-or-
Click the checkbox to the left of Severity at the top of the list to select all events listed in the
window for deletion.
2. Click Delete. A confirmation dialog box will appear.
3. Click OK to delete the event(s).
-or-
Click Cancel to cancel the action.
Enabling and Disabling Events
Events occurring on your DSView software system may be disabled using the Enabled Log Events
window. When an event is disabled, its state will appear as Disabled and the event will not be
logged until it is reenabled. An event may be reenabled by selecting it and clicking Enable.