User guide

282 DSView Installer/User Guide
• Information - Displays the Event Log - Information Events window, which displays events that
are neither periodic nor problematic.
• OK - Displays the Event Log - OK Level Events window, which displays events that are in a
normal or cleared state. This value typically appears at event start up or after leaving a previ-
ous event state.
• Non-Critical - Displays the Event Log - Non-Critical Events window, which displays abnor-
mal events that require correcting at a later time.
• Critical - Displays the Event Log - Critical Events window, which displays abnormal events of
a more serious nature that may require quicker action, such as the failure of a scheduled task or
loss of communication.
• Non-Recoverable - Displays the Event Log - Non-Recoverable Events window, which displays
severe abnormal events impacting your DSView management software session and requires
immediate corrective action.
-or-
Click Event Category to display a list of event logs belonging to a specific category in the side
navigation bar and then click on one of the following:
• Appliance - Displays the Event Log - Appliance Events window, which displays events related
to managed appliances.
• System - Displays the Event Log - System Events window, which displays events related to the
DSView management software host server, global settings, licenses, tasks or firmware.
• Authentication - Displays the Event Log - Authentication Events window, which displays
events related to user login and authentication.
• Users - Displays the Event Log - User Events window, which displays events relating to users.
• Units - Displays the Event Log - Unit Events window, which displays events related to units
(managed appliances and target devices), unit groups, sites, departments or locations.
• Tasks - Displays the Event Log - Task Events window, which displays events related to the
starting or stopping of an event.
• Unit Status - Displays the Event Log - Unit Status Events window, which displays events
related to the loss of or regaining of communication with a managed appliance.
• Access Control - Displays the Event Log - Access Control Events window, which displays
events related to a user’s privileges for working with specific managed appliances.
• Sessions - Displays the Event Log - Session Events window, which displays events related to
serial, KVM and virtual media sessions.
See DSView management software events on page 277 for more information.
To display non-recoverable, critical or non-critical event log entries using the top
navigation bar:
NOTE: Only members of the Administrator or Auditor user groups may display these event log entries.