User guide

10 DSView Installer/User Guide
If multiple connection methods are available, an alternate actions arrow will appear to the right of
the action. Clicking the alternate action arrow will display a list of other actions, in descending
order of priority. These alternate actions may then be selected to launch the corresponding
connection type.
Figure 1.3 illustrates using some of the Action links.
IPMI Session IPMI Viewer window IPMI 1.5 TDs
Telnet Session
Telnet Viewer window
or third party Telnet
viewer window
EVR1500 environmental monitors, generic
appliances, TDs and TDs attached to DS1800
digital switch, CPS appliance, CCM appliance or
DSR switch channels or ports
Serial Session Telnet Viewer window
TDs attached to CPS or CCM appliance
serial port
KVM Session Video Viewer window
TDs attached to DS1800 digital switch or DSR
switch channels or ports
Virtual Media Session Video Viewer window
DSR1030, 1031, 2030, 2035, 4030, 8030 and
8035 switches
Reserved Virtual Media
Session
Video Viewer window
DSR1030, 1031, 2030, 2035, 4030, 8030 and
8035 switches
Exclusive KVM Session * Video Viewer window
TDs attached to a DS1800 digital switch or DSR
switch channels or ports
<name> Embedded
Session
Viewer window
Supported versions of IBM ASM RSA II, DRAC
4 and NEC IPF embedded units.
* An Exclusive KVM Session link appears only when the alternate actions arrow is selected in the
Action column.
Table 1.3: DSView Explorer Window Links (Continued)
Clicking this link Displays Associated with