User guide

Chapter 8: Working with IPMI 1.5 Target Devices 235
Displaying LAN configuration information
The BMC LAN Configuration window displays information related to all BMCs in the IPMI 1.5
target device. The following information will appear for each BMC:
• IP Address - BMC IP address in standard dot notation (xxx.xxx.xxx.xxx).
• LAN MAC - BMC MAC address.
• Default Gateway IP - IP gateway (router) address used to send BMC messages or alerting a
party on a different subnet.
• Default Gateway MAC - MAC gateway (router) address used to send BMC messages or alert-
ing a party on a different subnet.
The following information may also appear for each configured BMC:
• Backup Gateway Address - Alternate gateway (router) IP address used to send LAN alerts.
• Backup MAC Address - Alternate gateway (router) MAC address used to send LAN alerts.
To display LAN configuration information:
1. From a Target Devices, Units in Site, Units in Custom Field, Topology or Recently Accessed
Units window, click on the name of a supported IPMI 1.5 target device. The side navigation
bar will contain the name of the target device at the top and Overview will automatically be
selected. The Unit Overview window will open.
2. Click IPMI in the side navigation bar and then click LAN Config. The BMC LAN
Configuration window will appear.
3. Click Close when you are finished, to return to the Target Devices, Units in Site, Units in
Custom Field, Topology or Recently Accessed Units window.
Displaying field replaceable unit (FRU) information
The Field Replaceable Unit Information window displays information related to the FRU boards in
the IPMI 1.5 target device. Any of the following information may appear for each configured
FRU board.
• Chassis information - type, part number and serial number
• Board information - language (for example, English), manufacture date, manufacturer, product
name, serial number, part number and file version (file used to load the FRU information on
the board)
• Product information - language (for example, English), manufacturer, name, part model num-
ber, version, product serial number, asset tag and file version (file used to load the FRU infor-
mation to the board)
To display FRU information:
1. From a Target Devices, Units in Site, Units in Custom Field, Topology or Recently Accessed
Units window, click on the name of a supported IPMI 1.5 target device. The side navigation