User guide

234 DSView Installer/User Guide
(FRUs) in the target device, in addition to discrete and numeric sensor information and system
events read from the BMC.
Clicking the name of a supported IPMI 1.5 target device in a target devices, Units in Site, Units in
Custom Field, Topology or Recently Accessed Units window will display an IPMI link in the side
navigation bar. Clicking the arrow next to IPMI will display a list of sub-links and automatically
select the Device Info link and the IPMI Device Information window.
The following sub-links appear beneath the IPMI link when it is expanded. Clicking one of the sub-
links in the side navigation bar performs the following actions:
• Device Info - Displays the IPMI Device Information window
• LAN Configuration - Displays the IPMI LAN Configuration window
• FRU Info - Displays the Field Replaceable Unit Information window
• Discrete Sensors - Displays the IPMI Discrete Sensors window
• Numeric Sensors - Displays the IPMI Numeric Sensors window
• SEL - Displays the System Event Log window
Displaying IPMI 1.5 target device BMC information
The IPMI Device Information window displays information for all BMCs in the IPMI 1.5 target
device. The following information will appear for each BMC:
• IPMI Version - IPMI version with which the BMC is compatible.
• Firmware Version - BMC firmware version.
• SDR Version - Sensor data record (SDR) command set version of the SDR device.
• Manufacturer ID - Original equipment manufacturer (OEM) of the functionality in the BMC,
including commands, codes and interfaces.
• Product ID - Manufacturer-specified identification used to specify the type of board, module or
system in which the BMC is used.
• Device Revision - Firmware revision of the BMC.
To display IPMI 1.5 target device BMC information:
1. From a Target Devices, Units in Site, Units in Custom Field, Topology or Recently Accessed
Units window, click on the name of a IPMI 1.5 target device. The side navigation bar will con-
tain the name of the target device at the top and Overview will automatically be selected. The
Unit Overview window will open.
2. Click IPMI in the side navigation bar. Device Info will automatically be selected and the IPMI
Device Information window will open.
3. Click Close when you are finished, to return to the Target Devices, Units in Site, Units in
Custom Field, Topology or Recently Accessed Units window.