User guide

198 DSView Installer/User Guide
To copy a macro group:
NOTE: Macro groups cannot be copied if you are using the DSR Remote Operations software.
1. Select Macros - Configure - Macro Groups from the Video Viewer window menu.
-or-
Click the Macro Groups button.
The Macro Groups dialog box appears.
2. Select one of the following:
All - displays both personal and global macros.
Personal - displays personal macros only.
Global - displays global macros only.
3. Select the desired macro from the Defined Groups list and then click Copy. The Copy Macro
Group dialog box will appear.
4. Type a 1-32 character name in the Name of copied macro group field.
5. Select whether you wish to make the copied macro group a personal or global macro from the
Macro Type area.
6. Click OK to copy the macro group. The Copy Macro Group dialog box is closed and the cop-
ied macro group will appear in the Macro Groups dialog box.
-or-
Click Cancel to cancel the action.
7. Click Close to exit the Macro Groups dialog box.
To change the macro group to be displayed in the Macros menu:
NOTE: The macro group displayed on the Macros menu cannot be changed if you are using the DSR Remote
Operations software.
1. Select Macros - Configure - Macro Groups from the Video Viewer window menu.
-or-
Click the Macro Groups button.
The Macro Groups dialog box appears.
2. Select one of the following:
All - displays both Personal and Global Macro groups.
Personal - displays Personal Macro groups only.
Global - displays Global Macro groups only.
3. Select the macro group to be displayed from the Defined Groups list box.
4. Select Display on Menu if you wish for the macro group to appear in the Macros menu.
5. Click Close to exit the Macro Groups dialog box.