User guide

186 DSView Installer/User Guide
To enter single cursor mode:
Select Tools - Single Cursor Mode from the Video Viewer window menu. The local cursor will not
appear and all movements will be relative to the target device.
-or-
Click the Single Cursor Mode button.
To select a key for exiting single cursor mode:
1. Select Tools - Session Options from the Video Viewer window menu.
-or-
Click the Session Options button.
The Session Options dialog box appears.
2. Click the Mouse tab.
3. Select a terminating keystroke from the drop-down menu in the Single Cursor mode area.
4. Click OK. When you enable Single Cursor mode, the specified key may be pressed to return to
Regular Desktop mode.
To exit single cursor mode:
Press the key on the keyboard that is identified in the title bar.
Cursor settings
When using the DSView software, your mouse pointer will change shape when over a Video
Viewer window. You may change the appearance of this second local cursor or eliminate it.
To change the mouse cursor setting:
1. Select Tools - Session Options from the Video Viewer window menu.
-or-
Click the Session Options button.
The Session Options dialog box appears.
2. Click the Mouse tab.
3. Select a mouse cursor type in the Local Cursor panel.
4. Click OK.
Scaling
You may choose among three preconfigured mouse scaling options or set your own custom scaling.
The preconfigured settings are: Default (1:1), High (2:1) or Low (1:2), as follows:
• In a 1:1 scaling ratio, every mouse movement on the desktop window will send an equivalent
mouse movement to the server.
• In a 2:1 scaling ratio, the same mouse movement will send a 2X mouse movement.