User guide

Chapter 6: Using the Video Viewer 179
Adjusting the View
Using menus or Task buttons in the Video Viewer window, you may:
• Align the mouse cursors.
• Refresh the screen.
• Enable or disable Full Screen mode. When Full Screen mode is enabled, the image will be
adjusted to fit the desktop up to a size of 1024 x 768. If the desktop has a higher resolution, the
following will occur:
• The full screen image will be centered in the desktop and the areas surrounding the Video
Viewer window will be black.
• The menu and toolbar will be locked so that they are visible at all times.
• Enable automatic, full or manual scaling of the session image. With automatic scaling, the
desktop window remains fixed and the device image is scaled to fit the window. With full
scaling, the desktop window is sized to match the resolution of the server being viewed. With
manual scaling, a drop-down menu of supported image scaling resolutions is displayed.
• Change the color depth of the session image.
To align the mouse cursors:
Click the Align Local Cursor button in the Video Viewer window toolbar. The local cursor will
align with the cursor on the remote device.
If cursors drift out of alignment, turn off mouse acceleration in the device.
To refresh the screen:
Click the Refresh Image button in the Video Viewer window.
-or-
Select View - Refresh from the Video Viewer window menu. The digitized video image will be
completely regenerated.
NOTE: You may also specify background refreshing of the Video Viewer window by a DS1800 digital switch or
DSR switch. See Using background refresh on page 180 for more information.
To enable or disable full screen mode:
NOTE: The View - Full Screen command may only be used by the primary user. The command is not available to
non-primary users who are sharing the session.
1. To enable Full Screen mode, click the Maximize button.
-or-
Select View - Full Screen from the Video Viewer window menu.