Manualshelf

User guide

ManualsBrandsAvocent ManualsComputer equipmentEquinox Console Manager CCM4850 CCM4850 CCM4850
181182183184185186187188189190
Chapter 5: Managing User Accounts 169
2. Click Groups in the top navigation bar. Built-In will automatically be selected in the side
navigation bar and the User Groups - Built-in window will open.
-or-
Click User-Defined in the side navigation bar. The User Groups - User Defined window
will open.
3. Click on a user group name. The User Group Properties window will open.
4. Click Access Rights in the side navigation bar. Target Devices will automatically be selected in
the side navigation bar and the Target Devices Access Rights window will open.
A check (
√) will appear in the corresponding column if the access right is available for the unit.
The column will be empty if the access right is not granted. See Changing Unit Access Rights
on page 102 for more information.
The access rights display may contain information that appears invalid. For example, virtual
media access can be enabled to a target device that does not support it. Similarly, virtual media
access could be enabled but KVM (Video Viewer) access may be disabled. See About target
device access rights on page 104 for an explanation.
5. Click Close when you are finished. The User Accounts - All window will open.
To display the access rights of a managed appliance in a user group:
1. Click Users in the tab bar.
2. Click Groups in the top navigation bar. Built-In will automatically be selected in the side
navigation bar and the User Groups - Built-in window will open.
-or-
Click User-Defined in the side navigation bar. The User Groups - User Defined window
will open.
3. Click on a user group name. The User Group Properties window will open.
4. Click Access Rights in the side navigation bar, and then click Appliances. The Appliance
Access Rights window will open.
A check (
√) will appear in the corresponding column if the access right is available for the unit.
The column will be empty if the access
right is not granted. See Changing Unit Access Rights on page 102 for more information.
5. Click Close when you are finished. The User Accounts - All window will open.