User guide

168 DSView Installer/User Guide
8. Click Close. The User Group - Built-In or User Group - User Defined window will open
(depending on which groups you were working with).
NOTE: You may also add or remove a user from a built-in or user-defined user group by clicking on a username
in a User Accounts window and changing its user group membership. See Changing user group membership on
page 158 for more information.
Displaying user group unit access rights
Different built-in and user-defined user groups provide different access rights for units. Access
rights determine which actions you may or may not perform on a unit. You may display the units
that belong to a built-in or user-defined user group and the access rights provided to each by the
built-in or user-defined user group.
Target devices appear in the Target Device Access Rights window, while managed appliances
appear in the Appliance Access Rights window.
For information about assigning or changing unit access rights, see Changing Unit Access Rights
on page 102.
Customizing the Unit Access Rights windows
By default, the following columns display in the Target Device Access Rights window and may be
removed by clicking the Customize link:
• Viewer Sessions - Whether a user may open a DSView software session with a target device
using a Video Viewer window.
• Power Control - Whether a target device connected to an SPC device outlet may be powered
up, powered down or have its power cycled.
• VM Sessions - Whether a user may establish virtual media sessions.
• Reserved VM Sessions - Whether a user may establish reserved virtual media sessions.
By default, the following columns display in the Appliance Access Rights window and may be
removed by clicking the Customize link:
• Reboot - Whether a user assigned to the built-in user group may reboot the managed appliance.
• Flash Upgrade - Whether a user assigned to the built-in user group may Flash upgrade the
managed appliance.
• Settings - Whether a user assigned to the built-in user group may configure the settings of the
managed appliance.
• Local Users - Whether a user assigned to the built-in user group may configure the local user
account of a DS1800 digital switch, CPS appliance, CCM appliance or DSR switch.
See Using the Customize link in windows on page 15 for more information.
To display the access rights of a target device in a user group:
1. Click Users in the tab bar.