User guide

Chapter 4: Managing Units 129
account appears under the name of the managed appliance. The Appliance Local User Account
Settings window will open.
2. Type a new name for the local user.
3. Use the drop-down menu to select a preemption level (1-4) for the local user. See Preemption
Levels on page 24 for more information.
4. If available, use the drop-down menu to select an access level: User Administrator, Appliance
Administrator or User.
5. Type a new password for the local account and then confirm the password.
6. Click Save to save your changes.
7. Click Close. The Appliances window will open, including your changes.
To assign target device access rights to a local account:
NOTE: You must have Configure Appliance Local User Accounts rights to assign target device access rights to a
local account.
1. From the Appliance Local User Accounts window, click on the name of a local account.
Settings will automatically be selected in the side navigation bar and the name of the local
account appears under the name of the managed appliance. The Appliance Local User Account
Settings window will open.
If the local user has Configure Local Accounts rights, a message will appear, informing you
that the local user may access all target devices in the system.
From the side navigation bar, click Access Rights. The Appliance Local User Account Access
Rights window will open.
2. Add or remove local user account access to a target device:
To add local user account access to a target device, select the name of the target device in the
Available Target Devices list. Multiple target devices may be selected by pressing
Ctrl while
clicking on the target device name. Click Add. The target devices will be moved to the
Assigned Target Devices list.
To remove local user account access to a target device, select the name of the target device in
the Assigned Target Devices list. Multiple target devices may be selected by pressing
Ctrl
while clicking on the target device name. Click Remove. The target devices will be moved to
the Available Target Devices list.
3. Click Save to save your changes.
4. Click Close. The Appliance Local User Accounts window will open.
Managing Active Sessions
You may display all active connections to target devices in your DSView software system using the
Active Sessions window.