User guide

126 DSView Installer/User Guide
3. Click on the appliance name.
4. Click Appliance Settings in the side navigation bar and then click Sessions. Active will
automatically be selected in the side navigation bar and the Appliance Sessions window
will open.
5. Click Exit Macros in the side navigation bar. The Appliance Exit Macros window will open.
6. Click the number of a macro. The Appliance Exit Macro Settings window will open.
7. Enter a unique description for the global macro in the Name field.
8. From the Select Keyboard drop-down menu, select the country configuration of your
keyboard. The keyboard graphic in the window will update to reflect your selection.
9. Click on the buttons in the keyboard graphic you wish to use to create the macro. As a button is
clicked, it will appear in the list box to the left of the keyboard graphic.
You may type or use the arrow buttons to specify a delay between buttons you selected from
the keyboard graphic. First, click the button in the list box after which you wish to place a
delay. Next, click Delay to insert the delay in the list box.
10. Specify the target devices on which you wish to use the macro by selecting a device in the
Available list. Multiple target devices may be selected by pressing
Ctrl while clicking on the
target device names. Click Add. The target devices will be moved to the Assigned list.
To remove selected target devices, select the target device from the Assigned list (multiple
target devices may be selected by pressing
Ctrl while clicking on the target device names) and
clicking Remove. The target devices will be moved to the Available list.
11. Click Save and then click Close. The Unit Views window will open.
Example: Creating a macro where the Ctrl key is held while F1-F2-F3 are typed:
1. Type
ControlF1-F2-F3 in the Name field. This is the name of the macro that will appear in the
Appliance Exit Macros window.
2. Click on the left or right Ctrl key in the keyboard graphic in the window. Ctrl Left - PRESS or
Ctrl Right - PRESS will appear in the list box to the left of the keyboard graphic.
3. Click F1, F2 and F3 in the keyboard graphic in the window. The keystrokes will appear in the
list box to the left of the keyboard graphic.
4. Click the same left or right Ctrl key in the graphic that you pressed in step 2. Ctrl Left -
RELEASE or Ctrl Right - RELEASE will appear in the list box to the left of the
keyboard graphic.
5. In the Assigned to Macro area, select the target devices to which you wish to assign the macro.
6. Click Save to save your changes.
7. Click Close.