Manualshelf

User guide

ManualsBrandsAvocent ManualsComputer equipmentEquinox Console Manager CCM4850 CCM4850 CCM4850
131132133134135136137138139140
Chapter 4: Managing Units 117
2. Click Appliances in the side navigation bar. The Unit Views - Appliances - All window
will open.
3. Click on the appliance name.
4. Click Appliance Settings in the side navigation bar and then click Ports and then click SPC.
The SPC Devices Attached to Appliance window will open.
5. Click on the name of an SPC device. Settings will automatically be selected in the side
navigation bar and the SPC Settings window will open. The name of the outlet and the SPC
device will also appear under the managed appliance name in the side navigation bar.
6. Click Sockets. The SPC Sockets window will open.
7. To select a single SPC device outlet, click the checkbox to the left of the device outlet.
-or-
To select all SPC device outlets, click the checkbox to the left of Socket at the top of the list.
8. Click On to power up the selected SPC device outlets. The Power column will display On.
-or-
Click Off to power down the selected SPC device outlets. The Power column will display Off.
-or-
Click Cycle to cycle the power (power down and then power up) of the selected SPC device
outlets. The Power columns will display Off and On and the Control columns will display
Cycling while power is cycling. When power cycling is completed, the Power and Cycling
columns will display On.
Customizing the Appliance Serial Ports window
By default, the following fields display in the Appliance Serial Ports window and may be removed
using the Customize link:
• Port - Displays the serial port number
• Name - Displays the name of the serial port
• Type - Displays the type of port (CLI, SPC or Standard)
• Baud - Displays the baud rate of the serial port
• Data Bit - Describes the data bit rate of the serial port
See Using the Customize link in windows on page 15 for more information.
To display or change the general properties for a CPS or CCM appliance
serial port:
1. Click Units in the tab bar.
2. Click Appliances in the side navigation bar. The Unit Views - Appliances - All window
will open.
3. Click on the appliance name.