User guide

112 DSView Installer/User Guide
2. Click Appliances in the side navigation bar. The Unit Views - Appliances - All window will
open.
3. Click on the appliance name.
4. Click Appliance Settings in the side navigation bar and then click Ports. IQ Modules will
automatically be selected in the side navigation bar and the Appliance IQ Modules window
will open. This window lists all modules with their EID, status, port number, application
version, hardware version and interface type.
5. To display an individual module’s settings, click on an IQ module. The Appliance IQ Module
Settings window will open.
To delete offline DSRIQ modules:
NOTE: Any offline module will appear with a red circle and an “X” to the left of its EID. An online module will
appear with a green circle to the left of its EID.
1. Click Units in the tab bar.
2. Click Appliances in the side navigation bar. The Unit Views - Appliances - All window
will open.
3. Click on the appliance name.
4. Click Appliance Settings in the side navigation bar and then click Ports. IQ Modules will
automatically be selected in the side navigation bar and the Appliance IQ Modules window
will open.
5. Click Delete Offline. A confirmation dialog box will appear.
6. Click Yes to confirm or No to cancel.
To upgrade DSRIQ modules:
NOTE: Offline DSRIQ modules may not be selected for upgrading.
1. Click Units in the tab bar.
2. Click Appliances in the side navigation bar. The Unit Views - Appliances - All window
will open.
3. Click on the DSR switch name.
4. Click Appliance Settings in the side navigation bar and then click Ports. IQ Modules will
automatically be selected in the side navigation bar and the Appliance IQ Modules window
will open.
5. Click the checkbox to the left of the DSRIQ modules you wish to upgrade.
-or-
Click the checkbox to the left of the EID column at the top of the list to select all DSRIQ
modules listed in the window for upgrading.
6. Click Upgrade. A confirmation dialog box will appear.