User guide

Chapter 4: Managing Units 95
d. (Optional) Type the web browser URL.
e. Click Next.
5. The Completed Successful window will open.
6. Click Finish.
To add a target device:
1. Click Add in a Unit Views window. The Add Unit Wizard will open. Click Next.
2. The Select Add Unit Procedure window will open. Click Add a single target device.
Click Next.
3. The Type in Device Settings window will open, where you may type the name and other
optional information.
a. Type the name.
b. Type either the address or the fully qualified domain name.
c. Type the Telnet port.
d. Type the web browser URL.
e. Click Next.
4. The Completed Successful window will open.
5. Click Finish.
Managing Units
The following items may be modified for units:
• Overview
• Credentials (supported IBM, DELL and NEC embedded units only)
• Properties
• Access Rights (displays only for users who are administrators or user administrators)
• Appliance Settings (DS1800 digital switches, CPS appliances, CCM appliances and DSR
switches only)
• IPMI (DSI5100 appliances only) - see Displaying Sensor Information by Selecting an IPMI 1.5
Target Device on page 233 for more information
• Connections (DS1800 digital switches, DSI5100 and CPS appliances, CCM appliances, DSR
switches and target devices only)
Changing Unit Overview Information
The Unit Overview window contains the following information: