User guide

Chapter 4: Managing Units 91
a. Select the type of cascade switch for each row from the drop-down menu in the Cascade
Switch Type column.
b. If you wish, type a name for each row in the Name column.
c. If two or more rows of a multiuser cascade switch are discovered, you may merge the
rows by selecting the checkboxes of those rows and clicking Merge. To undo the merge,
click the row of the merged switch and click Split.
d. Click Next.
9. The Completed Successful window will open.
When you add a CCM appliance that is using firmware compatible with AVWorks software,
you will be alerted that it must be migrated, along with a link named Add Migration Task,
which will take you to the Add Task Wizard.
10. Click Finish.
To add a single embedded appliance:
NOTE: This procedure is valid only for IBM ASM RSA II, DRAC 4, Compaq iLO and NEC IPF
embedded appliances.
1. Click Add in a Unit Views window. The Add Unit Wizard will open. Click Next.
2. The Select Add Unit Procedure window will open. Click Add a single appliance, then
click Next.
3. The Select Appliance Type window will open. Select an embedded appliance from the product
list, then click Next.
For an IBM ASM RSA II embedded appliance, continue to step 4.
For a DRAC 4 embedded appliance, continue to step 5.
For a Compaq iLO embedded appliance, continue to step 6.
For an NEC IPF embedded appliance, continue to step 7.
4. For IBM ASM RSA II embedded appliances:
a. The Configure IBM ASM RSA II Settings window will open.
b. In the Appliance Name field, type a 1-64 character appliance name. The name is not
case sensitive.
c. In the Address field, type a 1-256 character IP address in dot notation form or a DNS
name. The address is not case sensitive.
d. In the Username field, type a 1-64 character username to be used to log in to the embedded
appliance. Usernames are case sensitive.
e. In the Password field, type a 1-64 character password to be used to log in to the embedded
appliance. Passwords are case sensitive.
f. Click Next.