User guide

A controller map definition must be provided for each ISDN dial-back phone
number.
d. In the ISDN phone number field, enter the Integrated Services Digital Network (ISDN)
phone number for the appliance to dial-back to the DSView 3 server. You may enter
multiple dial-back phone numbers each separated by a comma. The number(s) will be
stored in the DSView 3 software database and automatically updated on the ACS
console server.
e. In the ISDN on hook time field, specify the on hook interval in the range of 2-10
seconds. The default value is 2 seconds. The on hook interval is the amount of time
after the initial dial-up connection is dropped before the modems on the DSView 3
server will receive incoming calls.
NOTE: If your DSView 3 server is on Windows, the ACS console server username and password must be
configured as a user in Windows before a dial-back connection can be established.
6. Click Save.
Email
To specify email properties:
1. Click the System tab.
2. Click Email in the side navigation bar. The DSView Server Email Server Properties
window will open.
3. Type a new address for the SMTP server that sends email notifications as a domain name or
an IP address in standard dot notation (xxx.xxx.xxx.xxx).
4. If your SMTP server requires login credentials, select Login required to access SMTP server
and type a username and password, then confirm the password.
5. Click Save to store DSView 3 software email property information in the DSView 3
software database on the host.
Unit status polling
To use unit status polling:
1. Click the System tab.
2. Click Unit Status Polling in the side navigation bar. The DSView Server Unit Status
Polling Properties window will open.
3. Select Enable unit status polling.
76 DSView® 3 Software Installer/User Guide