Avocent DSView 3 device license - 10 pack : User guide : Page 445

Table D.5 lists the VT100 ANSI mode and cursor keys for set and reset modes. Encoding and

decoding is supported for all the cursor keys listed.

Table D.5: VT100 ANSI Set and Reset Mode Cursor Keys

Cursor Key

Mode Reset Mode Set

Up Esc [ A Esc O A

Down Esc [ B Esc O B

Right Esc [ C Esc O C

Left Esc [ D Esc O D

Table D.6 lists the VT100 PF1-PF4 key definitions. Encoding of each listed key is supported;

decoding is not applicable.

Table D.6: VT100 PF1-PF4 Key Definitions

Key

Code Sequence

F1 Esc [ O P

F2 Esc [ O Q

F3 Esc [ O R

F4 Esc [ O S

Table D.7 lists the ANSI mode control sequences for VT100 terminal emulation and indicates

Avocent encoding/decoding support, where Yes = supported and No = not supported.

Table D.7: VT100 ANSI Mode Control Sequences

Control Sequence

Definition Encode/Decode

Esc [ Pn; Pn R Cursor Position Report No/No

Esc [ Pn D Cursor Backward No/Yes

Esc [ Pn B

Cursor Down

No/Yes

Esc [ Pn C Cursor Forward No/Yes

Esc [ Pn; Pn H Cursor Position No/Yes

Appendices 429