User guide

Figure C.2: DSR Remote Operations Window
Table C.2: DSR Remote Operations Descriptions
Number Description
1 Menu bar: Allows you to access many of the features in the DSR Remote Operations window.
2 Toolbar: Provides shortcut buttons for quickly accessing commands in the Tools menu.
3 Status Bar: Displays the tips for selected menu items and the progress of operations.
4
Content Area: Use this area to display information from the DSR switch and control and start
DSView 3 software sessions to the DSR switch.
5
Side Navigation Bar: Displays the DSR switching system information you wish to access, which
displays in the Content Area.
The items displayed in the content area of the DSR Remote Operations window will vary,
depending on the link selected in the side navigation bar. You may refresh any view by
selecting View - Refresh from the menu.
Servers view
Selecting Servers in the side navigation bar of the DSR Remote Operations window displays a
list of servers attached to the switch. The following items for each server will appear in the
content area:
• Name - The name of the server
• Port - The switch port to which the server is attached
• EID - The Electronic ID (EID) number of the IQ module attached to the server.
Table C.3: DSR Remote Operations Content Area Icons (Servers View)
Icon
Description
A target device that is powered up and has no established KVM Video Viewer sessions
A target device that has an active KVM Video Viewer session
A target device that is not powered up
A target device that is powered up but cannot establish a KVM connection because the path to
the target device is blocked (for example, a cascade switch has only one user port and that port
is already connected to another target device)
Appendices 421