User guide

If a PIN has not yet been assigned to the user or if security policy requires a PIN change, the
user will be prompted accordingly. If the RSA server generates the PIN, the user will be given a
brief interval to memorize it.
Regaining access
If access to a DSView 3 software system is lost, see Regaining Access to the DSView 3
Software on page 443.
Uninstalling the DSView 3 Software
To uninstall the DSView 3 software on a supported Windows system:
1. Select Start - Settings - Control Panel. The Control Panel will appear.
2. From the Control Panel, click Add/Remove Programs. The Add/Remove Programs dialog
box will appear.
3. Select Avocent DSView 3 and then click Change/Remove. The Uninstall Avocent DSView
window will open.
4. Click Uninstall.
To uninstall the DSView 3 software on a supported Linux or Solaris system:
1. Log in to the server as root.
2. Insert the DSView 3 software DVD into your DVD drive. If AutoMount is supported and
enabled, open a command window and continue with step 3.
-or-
If your system does not support AutoMount, issue the following command to mount
the DVD volume: mount <device> <mount point>, where <device> and <mount
point> are the names of your server’s DVD Linux or Solaris device and mount point
directory, respectively.
For example, to mount a DVD which is the second IDE unit on /media/cdrom, enter the
command:
mount /dev/cdrom /media/cdrom
3. Enter the following command to access the readme file.
less /media/cdrom/DSView/readme
Follow the instructions in the readme file.
22 DSView® 3 Software Installer/User Guide