User guide

6. Optionally, combine any multiuser cascade switches. Click the checkboxes of the cascade
switches that you wish to merge, and then click Merge.
To unmerge any cascade switches that you have merged, click the checkbox of the
merged cascade switch and then click Split.
7. Click Next. The Completed Successful window will open.
8. Click Finish. The Unit Overview window will open.
Saving a managed appliance configuration
You may save the configuration of a KVM switch or serial console appliance to a file. The
configuration file will contain information about the managed appliance, including the
following:
• Global settings
• Port settings
• SNMP trap settings
• SNMP manager settings
• The names of connected target devices
For information on restoring a configuration file, see Restoring a managed appliance
configuration on page 360.
To save a managed appliance configuration to a file:
1. In the Unit Overview window, click the Save Configuration icon or link. The Save
Appliance Configuration Wizard will appear.
2. Type a description of the configuration that will be saved and may be used if you wish to
restore the configuration at a later time, and then click Next.
3. The Completed Successful window will open.
4. Click Finish. The Unit Overview window will open.
Restoring a managed appliance configuration
You may restore the configuration of a KVM switch or serial console appliance. To restore the
configuration, a previously-saved configuration file must exist. See Saving a managed
appliance configuration on page 360.
Appliance configuration files are stored in the DSView 3 server appliance files repository. You
may display the available configuration files by clicking the System tab, clicking Appliance
Files in the top navigation bar and clicking Configuration in the side navigation bar.
360 DSView® 3 Software Installer/User Guide