User guide

5. The Select Import Options window will open. Specify the User Password Options. Select
Set the user’s password to the user’s username or Set the user’s password to a default
value. If you choose a default password value, type a 3-64 character password in the
Password and Confirm Password fields.
6. Specify the Account Options. Depending on which options you choose, you may select
multiple checkboxes. Only valid combinations will be enabled. You may choose from the
following options:
• Disable user account
• User must change password at next login
• User cannot change password
• Password never expires
7. Click Next. The Import In Progress message will display until the import attempt is
complete. If the import is successful, the Completed Successful window will open and
display a summary of the results.
If the import was not successful, the Completed Unsuccessful window will open and
display the errors that caused the import to fail. If some items could not be imported, a
message will direct you to a .csv file with more information. You may attempt to
import the data again.
8. Click Finish.
Although data has been imported from the AlterPath Manager to the DSView 3 software
system, the units are not yet compatible with the DSView 3 software. To complete the
configuration and import process, you must use the Migrate Units task. When creating the
Migrate Units task, it is recommend that you select Enable Secure Mode for the units. See Task:
Migrating units on page 373.
Using the Managed Appliance Tools
The DSView 3 management software contains tools that allow you to perform the following
actions on a supported KVM switch or serial console appliance:
• Reboot
• Upgrade the firmware
• Resynchronize the managed appliance so that it reflects the current DSView 3 software
system configuration
• Save or restore the configuration
356 DSView® 3 Software Installer/User Guide