User guide

1. In a Units View window containing target devices (see Accessing Units View windows on

page 118), click Active Modem Sessions in the side navigation bar. The Active Modem

Sessions window will open.

2. Click the checkbox to the left of the sessions. To disconnect all sessions, click the

checkbox to the left of Duration at the top of the list. (If you do not have permission to

disconnect an active session, you will not be able to select its checkbox or the checkbox at

the top of the list.)

3. Click Disconnect. A confirmation dialog box will appear. Confirm or cancel the

disconnect.

Connections to Units

The Connections link displays either target device or managed appliance connections.

• The Target Device Connections window lists all connections to the target device. You may

also use this window to add or delete a connection to or from the target device.

• The Appliance Connections window lists all connections from the managed appliance to

cascade switches or target devices. You may rename the units which are part of the

connection path through this window.

NOTE: Merged target devices appear as separate connections in the Connections window.

Connection display format

Connections typically appear in a format similar to the following for connections to target

devices, cascade switches and power devices:

<Managed appliance name>(<Port>) ® <EID Number> ® switch one <Port>®

The following examples illustrate typical connections that may appear in your DSView 3

software.

Example: Target device connections

In the following example, there are three target devices connected to ports 3, 4 and 8 of a

DSR1021 switch named dsr-1021-huntsville. The DSR1021 switch ports are connected to the

three target devices using IQ modules. The IQ module with an EID of 520255-044F6F is

Chapter 12: Unit Sessions and Connections 207