User guide

2. In the side navigation bar, click Properties, then click Services. The Unit Services window
will open, listing the services that are supported.
3. Click the checkbox next to the services to be removed. To remove all services on the page,
click the checkbox to the left of Service at the top of the list.
4. Click Delete. A confirmation dialog box will appear.
5. Confirm or cancel the deletion.
Target Device Settings
For information about power device settings, see Power Devices on page 187.
To display a list of target devices that are attached to a managed appliance or initiate
a push/pull name operation:
1. In a Units View window containing appliances (see Accessing Units View windows on
page 118), click on the name of an appliance.
2. Click Appliance Settings in the side navigation bar, then click Target Devices.
3. The Target Devices window will open.
4. To initiate a pull or push name operation (see Name Synchronization on page 141), click
the checkboxes to the left of one or more device names. To select all names on the page,
click the box to the left of Appliance Name at the top of the list.
• For a pull operation, click Pull Name.
• For a push operation, click Push Name.
Customizing the Target Devices window
The following fields may be displayed in the Target Devices window. Use the Customize link
to add or remove fields in the display. See Using the Customize link in windows on page 32.
• Name in Appliance - Name of the target device in the appliance.
• Name in DSView - Name of the target device in the DSView 3 software database.
• Connection - Connection path to the target device in the appliance.
To change the appliance name for a target device:
1. In a Units View window containing appliances, click on the name of an appliance.
2. Click Appliance Settings in the side navigation bar, then click Target Devices.
3. The Target Devices window will open. Click on a target device name.
172 DSView® 3 Software Installer/User Guide