User guide

confirm the operation.
2. The Multiple Unit Operation window will open, indicating the operation has been
submitted.
If you do not want to view the results of the operation, click Close and skip the rest of
this procedure.
To view the results of the operation, click Click here to view results.
3. The Operations Results window will open, listing all multiple unit operations and any unit
tasks that have been initiated (see Using Tasks on page 363). The entry for each operation
includes:
• Name of the operation
• When the operation started
• When the operation finished (blank if not yet complete)
• Status or result of the operation
You may also access this window at any time by clicking the Units tab, then clicking
Operation Results in the side navigation bar.
4. To view the results for an individual operation, click on the name. The Operation Results
window for that operation type will open, indicating:
• Status - Current status of the task
• Summary - Number of successful/failed/total unit operations (for example, the summary
of an operation with a status of ‘Rebooting the unit(s)’ might contain a 2/0/3 summary
- 2 successful, 0 failed and 3 total units)
• Name of the operation
• Type of unit
• When the operation started
• How long the operation took
• Status or result of the operation on the unit
5. Click Close.
Unit Overview Windows
The Unit Overview window contains the following information about an individual unit:
Chapter 7: Units View Windows 125