User guide

The sdconf.rec file will be uploaded from the DSView 3 software client to the DSView
3 server. This file will be used as the initial RSA configuration file for all DSView 3
software servers.
If some DSView 3 servers require a different configuration, a different sdconf.rec file
must be configured. Additionally, some installations may require an advanced option
file (sdopts.rec) for load balancing. You may specify these files using the procedure to
change settings for the RSA SecurID external authentication service.
7. The Establish Connection with Authentication Service window will open briefly. If the
external authentication service is added successfully, the Completed Successful window
will open.
Click Finish. The User Authentication Services window will open with the new service listed.
After the service is added, one or more RSA user accounts must be added to the DSView 3
software.
NOTE: The node secret file for the server will not be created until the first RSA user logs into the DSView 3
software.
To change settings for the RSA SecurID external authentication service:
1. Click the Users tab.
2. Click Authentication Services in the top navigation bar. The User Authentication Services
window will open.
3. Click on the name of the SecurID service.
4. Click Connection in the side navigation bar. The Authentication Service Connection
Settings window will open.
5. To change the name of the service:
a. Type a 1-64 character name in the Service Name field.
b. Click Save.
c. If that is the only change you are entering, click Close. Otherwise, continue with the
next steps.
6. To clear the RSA SecurID node secret for one or more DSView 3 servers:
a. Click the checkbox to the left of the server name. To select all DSView 3 servers on
the page, click the checkbox to the left of DSView Server at the top of the list.
b. Click Clear Node Secret. A confirmation dialog box will appear.
c. Confirm or cancel the operation.
112 DSView® 3 Software Installer/User Guide