Datasheet
10 DS1800 Installer/User Guide
For Sun:
a. From the common desktop environment, go to Desktop Controls - Mouse
Style Manager.
b. Set the mouse acceleration to 1.0.
6. Begin connecting servers directly to the DS1800 and/or connected KVM
switches. You can have any mix of computers and switches connected to
one DS1800 unit.
NOTE : The DS1800 supports specic AutoView and OutLook switches. Contact Avocent
technical support or your reseller for details.
To connect a user interface cable to a server:
Locate the user interface cables that you purchased with your DS1800 unit.
Ensure that the cable is com-
patible with the computer you
are connecting. Connect this
cable to the keyboard, mon-
itor and mouse ports on the
first computer you will be
attaching to this DS1800 unit.
Repeat this step for all com-
puters you wish to attach.
To connect a user interface
cable to a KVM switch:
Plug the keyboard, video and mouse connectors on your computer interface
cable into the user keyboard, monitor and mouse ports on the rear panel
of your switch. Repeat this step for each
KVM switch in your system.
7. Attach the DB25 connector on the
remaining end of the computer interface
cable to the DS1800 rear panel in an
available computer port. Repeat this
step for each computer interface cable
in the system.
NOTE: The DS1800 and all attached computers should be powered down before servicing the
unit. Always disconnect the power cord from the wall outlet.