User guide

CLI Overview for Administrators.....47
Option Description
pdus
show up in the PDUs node when they are discovered. Only power control opearation is supported by
these PDUs.
To rename a PDU:
1. Log onto the CLI as an administrator and enter cd power_management/pdus to navigate to
the pdus level.
--:- / cli-> cd power_management/pdus
2. Type rename and press Tab Tab to expand the parameters.
--:- pdus cli-> rename <PDU_ID> <Tab><Tab>
3. Enter set newpdu_id=<new_PDU_ID>.
--:#- [pdus] cli-> set new_pdu_id=mypdu
--:#- [pdus] save
NOTE: See the Avocent ACS 6000 Installation/Administration/User guide for how to perform other
authorized PDU configuration options.
To manage power for a selected outlet:
See cycle, on, off, lock and unlock on page 16 for how to manage power at the power_
management level.
Active Sessions Information
The Active Session information fields are described in the table below. An authorized user can kill
an active session with the Kill command.
Field Description
user Logged in user
client_ip Source of the connection
creation_time Time of the session creation
session_type Type of session (console, http)
connection_type Type of connection (cli, wmi - that is, Web Manager)
target_name Target name or alias if session is an access session
id Session ID
parent id Parent ID if session is a subsession
Active Sessions Field Descriptions
To view and kill Active_Sessions:
1. From the / level CLI prompt, enter cd active_sessions.