User guide
44.....Avocent® ACS6000 Advanced Console Server
If no internal modem is installed, the port name is ttyA1. If an internal modem is installed, the port
name is ttyM1.
Enter the commands: set_dial-in, set dial-out or set_power to configure the auxiliary port.
NOTE: The set_power command will not be available when an internal modem is installed.
--:- / cli-> cd ports/auxiliary_ports/
--:- auxiliary_ports cli-> show
Port Device Status Profile
===== ====== ======== ============
ttyA1 ttyA1 disabled unconfigured
Type ls to see availables sub-nodes.
--:- auxiliary_ports cli->
Pluggable Devices
Type the command enable_pluggable_device_detection to permit detection of attached
pluggable devices. Type show to display a list of all detected pluggable devices. Type cd_<device
name>to configure the device.
Authentication
Enter cd authentication to navigate to the authentication level.
--:- / cli-> cd authentication
NOTE: Kerberos does not work unless the administrator copies the /etc/krb5.keytab file from the Kerberos
server and overwrites the /etc/krb5.keytab file in the console server.
Authentication Navigation Tree
appliance_authentication
authentication_servers
radius
tacacs+
ldap(s)/ad
kerberos
nis
dsview
Authentication Options