User guide

Chapter 8: Ports Menu and Forms 79
Figure 8.6: Ports - Virtual Ports - New/Modify Port Dialog Box
2. From the pull-down menu select the number of ports that you wish to assign as slaves. Choices
are 1, 4, 8 and 16.
3. Enter the First Local Port Number. This is the first port number on the master.
4. Enter the Local IP address. This is the IP address of the master.
5. Enter the First Local TCP Port Number. This is the first TCP port number on the master.
6. Enter the Remote IP address. This is the IP address of the slave.
7. Enter the First Remote TCP Port Number. This is the first TCP port number of the slave. The
default is 7001.
8. Select the communication protocol between the master and the slave from the Protocol pull-
down menu. The options are Telnet or SSH.
To assign names to slave ports in the cluster
Selecting the Port Names button on the New/Modify Port dialog box, displays the form shown in
the following figure.