User guide

78 Cyclades® CS Console Server Installation, Administration and User Guide
Figure 8.5: Ports - Virtual Ports - New/Modify Port Dialog Box
The following table describes the fields available in the Virtual Ports New/Modify Port dialog box.
Once you have configured the slave console server and defined the cluster parameters, the slave
serial ports and the connected devices are accessible from the master console server under
Applications - Connect - Serial pull-down menu.
To cluster console servers or modify cluster configuration:
Use this procedure if you wish to cluster console servers and add or modify ports.
NOTE: The console servers should be connected individually to an IP network. The units should not
be cascaded.
1. Go to Ports - Virtual Ports in Expert mode and click the Add button to add new slave ports or
click the Edit button to edit a slave port. The New/Modify Port dialog box appears.