User guide

Chapter 6: Network Menu and Forms 35
2. Enter the name assigned to the IP address of the console server in the Host Name field, which
is the fully qualified domain name identifying the specific host server on the network.
3. Enter a console banner in the Console Banner field. The console banner appears on the console
upon logging into and exiting from a port as a way to verify or identify the particular
port connection.
4. Under Ethernet Port, complete or edit the following fields, as necessary.
a. Enter the IP address of the console server in the Primary IP field.
b. Enter the netmask in the Network Mask field.
c. Specify the network mask of the secondary IP in the Secondary Network Mask field.
d. Specify the desired maximum transmission unit in the Maximum Transmission Unit field.
5. Under DNS Service specify or change the following information, if desired.
a. Enter the address of the domain name server in the Primary DNS Server field.
b. If there is a backup DNS server, enter the address of the secondary DNS in the Primary
DNS Server field.
c. Enter the domain in the Domain Name field.
d. Enter the IP address of the gateway in the Gateway IP field.
6. Click apply changes.