User guide

8 Cyclades® CS Console Server Installation, Administration and User Guide
Other Methods of Accessing the Web Manager
You can access the Web Manager using either DHCP or the default IP address.
NOTE: Accessing the Web Manager using either DHCP or the default IP address requires additional setup and
configuration specific to your site’s network configuration.
To use a dynamic IP address to access the Web Manager:
This procedure assumes that DHCP is enabled and that you are able to obtain the dynamic IP
address currently assigned to the console server.
1. Mount the console server.
2. Connect servers and other devices to be managed through the console server.
3. Power up the console server and connected devices.
4. Enter the console server’s IP address in the browser’s address field.
5. Log in to the console server and finish configuring users and other settings using the
Web Manager.
To use the default IP address to access the Web Manager:
The default IP address for the console server is 192.168.160.10. This procedure assumes that you
are able to temporarily change the IP address of a server located on the same subnet as the Cyclades
CS console server.
1. On a server that resides on the same subnet as the console server, change the network portion
of the IP address of that server to 192.168.160. For the host portion of the IP address, you can
use any number except 10, 0 or 255.
2. Open a browser on the server with the changed address. Enter the console server’s default IP
address, https://192.168.160.10, to bring up the Web Manager and log in.