User guide

Appendices 99
Circuit overloading
Consideration should be given to the connection of the equipment to the supply circuit and the
effect that overloading of circuits might have on overcurrent protection and supply wiring.
Appropriate consideration of equipment nameplate ratings should be used when addressing this
concern.
Elektrische Überlastung
Bitte beachten Sie beim elektrischen Anschluss der Geräte, dass diese zum Schutz vor Überlastung
mit entsprechenden Schutzvorkehrungen ausgestattet sein können. Bitte sorgen Sie gegebenenfalls
für Klarheit durch entsprechende Beschriftung:
Reliable earthing
Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be
given to supply connections other than direct connections to the branch circuit, such as power strips
or extension cords.
Zuverlässige Erdung
Eine ausreichende Erdung der im Rack montierten Geräte muss sichergestellt sein. Insbesondere
sollte indirekten Verbindungen zur Stromversorgung über Powerleisten oder Verlängerungen
besondere Aufmerksamkeit gewidmet werden.
Safety precautions for operating the console server
Please read all the following safety guidelines to protect yourself and your
Cyclades CS console server.
Sicherheitsvorkehrungen beim Betrieb des Cyclades CS console server
Bitte lesen Sie alle folgenden Sicherheitsrichtlinien um sich und Ihren Cyclades CS console server
vor Schäden zu bewahren.
WARNING: Do not operate your Cyclades CS console server with the cover removed.
Vorsicht: Bitte betreiben Sie den Cyclades CS console server nicht mit geöffnetem Gehäuse.
CAUTION: To avoid shorting out your Cyclades CS console server when disconnecting the network cable, first
unplug the cable from the Host Server, unplug external power (if applicable) from the equipment and then unplug
the cable from the network jack. When reconnecting a network cable to the back of the equipment, first plug the
cable into the network jack and then into the Host Server equipment.
Vorsicht: Um Schäden beim Entfernen des Netzwerkkabels zu vermeiden bitte immer zuerst das Kabel vom
Host Server entfernen, anschließend die externe Stromzufuhr abklemmen und danach das Kabel aus der
Netzwerkbuchse ausstecken. Beim Wiederherstellen der Verbindung immer zuerst das Kabel in die
Netzwerkbuchse des Cyclades CS console server zuerst einstecken und danach das Kabel in den Host
Server einstecken.