User guide

Parameter
Description
Pool Name
The name of the pool. The pool name is mandatory and should follow hostname guidelines, not exceed 64 characters and start with a letter.
TCP Port
Alias
The TCP Port Alias where the pool responds. This parameter is optional.
Pool IPv4
Alias
The IPv4 address used by the pool. This parameter is optional.
Pool IPv4
Alias Inter-
face
The interface used by the IPv4 Alias. Default: Eth0.
Pool IPv6
Alias
The IPv6 address used by the pool. This parameter is optional.
Pool IPv6
Alias Inter-
face
The interface used by the IPv6 Alias. Default: Eth0.
Table 3.8: Pool of CAS Ports Parameters
Dial-in Profile
An administrator can configure secure dial-in settings such as OTP login, PPP connections,
PPP/PAP authentication, callback and OTP users for PPP connections.
NOTE: If pluggable devices are being used for dial-out, dial-in should be disabled.
To configure secure dial-in settings for ports with the Dial-in Profile:
1. Select Ports - Dial-In Profile - Settings.
2. To enable logging in to the console server through the modem and select a condition for
which logging in is allowed, perform the following steps.
a. To allow callback connections only, select Callback.
b. To allow any connection, select Enable.
3. To enable OTP authentication, select Enable from the OTP Login Authentication menu.
4. To enable and select a condition for PPP connections, perform the following steps.
a. To allow PPP callback connections only, select Callback.
b. To allow any connection, select Enable.
48 Cyclades™ ACS 6000 Advanced Console Server Installation/Administration/User Guide