Service manual

55
Accessing Connected Devices
This chapter describes set up and configuration parameters for accessing serial ports and connected
devices.
Connection Profiles and Protocols
The following table describes each connection profile and supported protocols.
Table 4.1: Connection Profiles and Protocols
Connection
Profile
Supported
Protocol Description
Console Access
Server (CAS)
Telnet
SSH
TelnetSSH
Raw
Configure when a serial port is connected to the console port of
a server.
Terminal Server
(TS)
Telnet
SSHv1
SSHv2
Local Terminal
Raw Socket
Configure when a terminal is connected to the console port of
a server.
Bidirectional
Telnet
Telnet (CAS)
Telnet (TS)
Supports both CAS profile Telnet connection and TS profile menu
shell. Both connection protocols are supported on one port;
however, connections can not be opened simultaneously.
Modem (RAS) PPP
PPP-No Auth
SLIP
CSLIP
Configure when a modem is connected to a serial port.
Power
Management
Power
Management
Configure when a power management device is connected to a
serial port.
CHAPTER
4