Service manual

Appendices 137
Firmware upgrade
To upgrade the firmware on the console server:
1. Enter the following command at the CLI prompt.
cli> administration upgradefw ftpsite <n.n.n.n> username <name>
password <password> filepathname <path> checksum <yes|no>
As an example, the following parameters are used to show the command usage.
FTP Server: 192.168.100.111
Path: /images/zImage
User: john
Password: john1234
cli> administration upgradefw ftpsite 192.168.100.111 username john
password john1234 filepathname /images/zImage checksum no
2. Activate and save your configuration.
3. Close the CLI session and reboot the console server.
cli> quit
# reboot